The Product must be diluted with water.
Apply the antiseptic with a brush, roller, or spray 2-3 times after each previous layer has dried. When treating an already affected surface, apply an antiseptic, clean the surface after 24 hours and repeat the treatment. When processing mineral surfaces that are directly affected by water-cover after drying with a hydrophobizer gkzh-11 or water-resistant paint materials. The average consumption of 100-150 g./sqm mineral substrates and 200-300 gr./square meters at the wood. When used as a biocidal additive in solution mixtures, test on a small amount for compatibility.
Water-soluble paint: add 250 ml per 20 l of paint and mix thoroughly.
Plaster additive: 250 ml of the product is enough for 10 liters of water. Grout or plaster is mixed on the resulting solution.
Grout for joints: 50 ml is added to the water for sealing 5 kg of dry weight.
Addition to Wallpaper glue: add approximately 25-30 ml of the active agent to 1 liter of water in the glue mixing liquid, then prepare the glue according to the instructions.
Precautions: use skin, eye, and respiratory protection (rubber gloves, protective clothing, goggles, and a respirator) when working. In case of contact with skin, mucous membranes, eyes-immediately rinse with plenty of running water for 10-15 minutes. Seek medical attention if necessary.
Danger: may irritate the skin.
Storage and transportation: Transport and store at a temperature of +5°C to +40°C, in hermetically sealed original containers, separate from food, in a cool, ventilated area, out of the reach of children and animals. Avoid heat and direct sunlight. The composition retains its properties after short-term freezing. Dispose of in accordance with SanPiN 22.214.171.1242-03
Shelf life: 36 months